There’s nothing that wreaks havoc on your pool system like air in the lines. It makes gurgling noises, prevents the pump from working as efficiently as it should, and this problem can actually stop your robot pool cleaner altogether if the circulation is affected. Whether using a pool vacuum, skimmer or a robot cleaner for your pool, fixing air leaks is important to prevent the system from collapsing. This guide will examine how to diagnose and remedy air in your pool lines—and why your robotic pool cleaner may yet help you identify the problem sooner than you think.
How to Diagnose Air in Your Pool Lines
Your System Has Air Leaks When your air conditioning has air leaks, you might find:
Bubbles coming from return jets
Pump basket not filled with water
Inconsistent water flow
Loss of prime in the pump
If these symptoms surface, your pool vacuum or swimming pool robot cleaner starts leaving certain portions, in the filtration process you also get to observe less activities taking place. The most high-tech robot pool units require a functioning system for long-term and consistent cleaning.
Process: How to get rid of air in pool lines
Check the Skimmer and Water Level
When the water level is too low, air can get drawn in through the skimmer. Ensure a sufficiently high level, at least half of the skimmer opening height, of pool water around the skimmer opening. If not, continue topping it off and rechecking for bubbles.
Check the Pump Lid and O-Ring
An air leak from a bad, or improperly sealed pump lid may drag air into the system. Clean and grease the O-ring, and secure the lid firmly.
Look at the Plumbing Connections
Check for suction side leaks at fittings with soapy water solution. Bubbles along pipe unions indicate the suction of air.
Drain Plugs and Valve Covers Tighten up
Check the plugs on your pump and pool booster pump too — they are commonly the forgotten items. In case you didn’t know what is a pool booster pump – it is a second pump that sits alongside the main pump and powers pressure-side cleaners and it can also experience air leaks.
Prime the Pump Again
If your pump is not primed, shut off the system and fill the pump basket with water then turn it back on. Some air should escape after a few minutes.
The Way Your Automatic Pool Cleaner Robot is a Key to Identifying Circulation Problems
Your robot pool cleaner, be it the Maytronics pool cleaner or Beatbot, doesn’t use suction lines, but still, it’s helpful in identifying areas of irregular water flow. When your wall climb pool cleaner doesn’t make it to the water line or gets hung up in the hard to reach corners, this may be indicative of poor circulation due to leaks.
It’s a good idea to check in the mid-season for algae buildup in corners and behind steps. Products such as the Beatbot AquaSense 2 Ultra, the Beatbot AquaSense 2 Pro and the Beatbot AquaSense 2 assist in detecting and cleanup. And yes—will a pool robot remove algae? With high-quality filters and brushes, it sure will.
When to deep clean or drain
Once you’ve addressed air leaks but are still witnessing performance problems or a sight of poor water quality, it could be that you should acid wash pool surfaces or thoroughly clean faces. For the worst cases, you may even have to learn how to drain an inground pool without a pump — carefully and safely — to get the pool back to zero.
Helpful Maintenance Tools and Tips
Pool Vacuum For Algae: Great for spot treatments in areas that are likely to grow algae during low circulation.
Skimmer Basket: Keep it clean‚ clogs can cause air to be drawn into system.
7) Pool booster pump (if using): Check it for air needs to be airtight and in good working order if using it in your installation.
Conclusion
Repairing air in your pool suction line ensures your pool cleaner, pool vacuum, and pool filtration system work at full suction. Whether it’s a small O-ring or low water issue, locating and fixing air leaks early will save major headaches in the future. Now there’s an intelligent way to care for your pool with Tri-zone Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro and Beatbot AquaSense 2 – nobody said cleaning your pool has to be hard. Combining high-tech solutions and regular inspections will ensure that your system stays airtight and your water crystal clear.
Markmalte is an experienced writer for The Celebrity Niche, specializing in celebrity stories. With a keen eye for detail, he brings the latest updates on celebrity relationships, biographies, and news to his readers.
